Kitchen Faucets Manufacturers Introduces The Maintenance Details Of Heating Faucets

Kitchen Faucets Manufacturers introduces the maintenance details of the heating faucet:

1. First check whether the power supply has electricity, and test with an electric pen.

2. Plug in the power plug of the electric faucet, and use an electric pen or a screwdriver with a well-insulated handle to connect the two contacts. If there is an electric spark, the electric faucet is good. If it is not hot, the water pressure is not enough. The gap between the contacts, but the contact gap is adjusted at the factory, generally do not move; if there is no electric spark and the indicator light does not light, it means that the thermal protection is broken, and it is enough to replace the thermal protection if there is no electric spark, When the indicator light is on, it means that the heating tube is burnt out, the heating tube must be replaced, and special tools are required to replace the heating tube.

3. The time of single-use of high-temperature hot water should not be too long.

4. It is necessary to prevent freezing, and it cannot be used when it freezes, and the power supply must be cut off.

5. It is forbidden to install and use upside down.