An Important Basis For The Work Of Stainless Steel Sinks

Update:26-01-2020
Summary:

We all know that it is easy to compare a large brand si […]

We all know that it is easy to compare a large brand sink with a low-end and low-quality small brand sink, but it is often difficult to compare how to compare the high-quality sinks in the big brands. Often the prices are similar and the quality is similar. It is more difficult to determine the winner. So which aspects should we look at?

 

 

First of all, the size of the R angle is an important basis for determining the work of the sink. For example, for the double tank, basically all the double tanks are divided into two integrally stretched tanks and a wheel-welded panel. Some friends Having said that, since it is wheel welding, why can't I see the welding marks? In fact, it has been polished and smooth, and you can't see it at all.

 

So what is the R angle? The degree of bending around the stainless steel sink body is the R angle. The larger the R angle, the lower the process difficulty, and the smaller the R angle, the higher the process difficulty. Because every degree decreases, it means there is a danger of punching through the steel plate. So if you don't know how to choose between the two sinks, it is better to look at the R angle, the sink with the smaller R angle is preferred.

Some small R angle sinks need to be welded to complete. The R angle is the corner angle of the sink when it is stamped. If the R angle is less than R10, welding is required to achieve it. Therefore, you don't have to just look at whether welding or stretching, it depends on its level of technology.

 Many sinks deliberately increase the weight of the coating and rubber pads in order to confuse consumers by adding weight, which creates an illusion and promotes transactions. Therefore, do not judge the quality of the sink by the weight.

 

 Secondly, the edge treatment is very important. The edge treatment is good, so the flatness is higher than that. The high flatness means that it can be smoothly attached to the countertop. Better, the edges are smoother and not scratched. This may not be easy for everyone to understand, but it is better to compare the several sinks that I often recommend.

 

The degree of fineness of drawing is also very critical. I suggest that everyone choose the drawing sink, but now the drawing sink is endless, you can pull me too. Therefore, when you buy, you must carefully discern the fineness of the drawing. The more delicate the drawing, the better the workmanship.

 

The back coating is also sturdy and durable. Generally, the back coating has the functions of moisture absorption and heat insulation. But many brands, including some big brands, are also the same. You can buckle the coating with a small force with your nails. This coating has no use value, and it will peel off in a few years.

 

The rubber pad can reduce vibration and noise at the bottom of the sink, but some of the big brand sinks do well elsewhere. It shrinks here. Used rubber or oversized rubber pads, or rubber The pad is super hard, so is n’t the big piece of rubber bad? In fact, the bottom of the sink only needs to be affixed with rubber at the place where the faucet is flushed. The big piece and the small piece have the same effect, but the big piece is easy to cause the sink. The bottom adhesion is reduced, and the performance of reducing noise is reduced.

 

As China's first-class    Stainless Steel Sink Manufacturers   and supplier of stainless steel sinks, AFA continues to innovate products and rely on superior quality to establish itself in the market. Afastainlesskb puts quality first, followed by sales. AFA will not disappoint customers who trust us. The material we use is 304 stainless steel. It is a universal stainless steel with good rust and high temperature performance. Whether it is beautiful or hard stainless steel, it is the best material for sink stainless steel appliances, and it has become the "darling" of the public. Our products reduce heat loss and are especially suitable for hot water delivery. In addition, it will not cause environmental pollution, nor cause secondary pollution of water quality. Keep the water clean and fully ensure health and safety. We can tell you accurately that buying a stainless steel sink brings great economic value.Welcome to buy: https://www.afastainlesskb.com/product/stainless-steel-sink