Stainless Steel Sink Manufacturers Introduces How To Clean The Sink

Update:06-07-2020
Summary:

In the face of rusty sinks, we should do not panic and […]

In the face of rusty sinks, we should do not panic and easily remove them with a few tips. Below is the method used by Stainless Steel Sink Manufacturers to share the sink rust removal method: when the sink is not in use, it can be covered with film, paper, etc. In order to avoid unintentional corrosion during the house decoration process.

 

1. After the sink is installed correctly, first use the distributed "five cleansing powder" and "cleaning oil bag" to wipe the stain on the surface of the sink, clean the sink, and wipe off the surface moisture with a clean towel.

 

2. Mineral deposits and water spots should be removed using low-concentration vinegar solution or decontamination powder, and finally cleaned completely with clean water.

 

3. Lumps of rust caused by acid or alkali strong substances that were not rinsed in time or not cleaned in time: ① should be rinsed with water immediately; ② dipped with ammonia solution or neutral carbonated soda solution, stainless steel treatment agent, etc.; ③ Wash with neutral detergent or warm water.

 

4. Due to improper protection of the decorated house, the residual rust in the water pipe left spot-like rust spots on the stainless steel sink: ① scrub with toothpaste; ② rinse with cold water, and then wipe dry with cotton cloth.