The sink area is the starting place for cooking. It is […]
The sink area is the starting place for cooking. It is responsible for the cleanliness. It is in a humid and humid environment for a long time. If it is not cleaned in time, scale and oil are inevitable. With stainless steel metal, the rust may be very large. The surface dirt cleaning of the Stainless Steel Kitchen Sink is mainly to solve these three ills.
I believe that everyone is familiar with scale. They are often seen in the humid environment of kitchens and bathrooms. In addition, thick white stains appear on the bottom of the kettle. This is also scale.
Want to avoid the generation of scale is of course clean in time and leave no sanitary corners, but the scale is not afraid, the removal is very simple, just the right medicine. The main components of the scale are calcium carbonate and magnesium carbonate. It is possible to use an acid or a base, and the substance after the chemical reaction is dissolved in water, so the scale is removed.
Acidity corrodes stainless steel while removing scale, so it is not recommended. Alkaline, commonly used is baking soda, sweet potato powder, mixed with water, the towel is wet, covered in the scale area for 2-3 hours, the scale will slowly collapse. If you are too lazy to use such a clean and expensive stainless steel detergent, you can.
2. Oil stain
The removal of oil from the stainless steel sink area is not simple. The detergent does not play much role. The main reason is that the oil is not cleaned in time. The oil is very like to absorb dust. It needs some means to remove them.
Although it is not easy to remove, it is not without a solution. Use the two tools of baking soda and starch to get rid of the disease. After baking soda, it is an alkaline solution. It dissolves the acidic oil in minutes. Then the starch is used to cover the oil. The starch can absorb the stubborn oil in the gap and has a polishing effect.
If other stainless steel cutlery is placed in the sink, and the water is assisted, the risk of rust is high. For the rust spots generated, the conventional removal method is to use a chemical substance, acid and iron to undergo a metathesis reaction, and the rust can be removed. However, this also destroys the anti-oxidation coating on the stainless steel surface, making the stainless steel more susceptible to rust.
In order to protect the anti-oxidation layer on the surface of the stainless steel sink, it is still necessary to use a professional rust-removing solvent, mainly to prevent any damage to the material of the sink.