Stainless Steel Faucets Manufacturer Share The Necessary Cleanliness Tips For Cleaning

Update:26-03-2019
Summary:

The oil of the gas stove is mainly on the stove head. T […]

The oil of the gas stove is mainly on the stove head. The firing rack of the stove can be removed and "boiled" to clean. Fill a pot of water, put the stove head to be cleaned into the pot, add a little detergent, and wait for the water to heat up. Oily dirt will peel off automatically. The following AFA stainless steel faucets manufacturer share the necessary cleanliness tips for cleaning.

The hood, gas stove, and cabinets are the three major components of the kitchen. They all face the "greasy" problem to varying degrees. How to remove oil becomes the top priority of cleaning.

As far as the hood is concerned, the oil net and the fan blades become two “gas collecting points”. The removed oil net can be placed in the warm water of a neutral detergent for 5-10 minutes, and then put with a soft plastic brush. The dirt in the pores of the filter is removed and dried with a dry rag.

The cleaning of the fan blades of the range hood can be sprayed with the washing liquid such as soot. In addition, the fan blades can be carefully removed, soaked in the self-mixed detergent and vinegar mixed hot water, soaked for about 15 minutes, and then reused. Wipe clean with a rag.

When cleaning the kitchen, since the cabinet needs to be cleaned inside and outside, it is necessary to remove the items in the cabinet, such as bowls, dishes, and chopsticks, to the outside of the kitchen. Painted walls, tiled countertops, etc. Because the kitchen fumes tend to be very greasy, detergents can be used to remove oil stains, which are generally best applied after 30 minutes of application. If the grease accumulates in the water tank for a long time, it is not easy to clean. You can pour some grease cleaning agent into the water tank and rinse it with hot water.

The oil of the gas stove is mainly on the stove head. The firing rack of the stove can be removed and "boiled" to clean. Fill a pot of water, put the stove head to be cleaned into the pot, add a little detergent, and wait for the water to heat up. Oily dirt will peel off automatically.

 

The wall is barely exposed, and it is easy to leave stains such as graffiti. If it is found that the special dirt on the wall should be erased in time, the method is to scrub the water-resistant wall surface with a cloth, and then dry it with a dry towel after washing; for the water-resistant wall surface, wipe with an eraser or wring with a towel and some cleaning liquid. After wiping.

 

For some walls that are relatively strong, or that are difficult to wipe with water. It is best to use fine sandpaper to gently rub off the black and then use a wall paint brush to repair it. Shallow stains can be treated with sandpaper to reduce stains. If the stain is not removed, try using a towel to remove a little toothpaste.

 

For example, where the furniture is placed for a long time, the imprint of the furniture will appear on the wall, and the shoe polish or key scratches left at the entrance cannot be removed, and the paint needs to be re-applied.

 

For wall paint, the best cleaning and maintenance method is to wipe off the surface ash every day, and regularly clean and maintain it with fountain mist wax water. The wax water has both cleaning effect and transparent protective film on the surface layer, which is convenient for daily use. clean.

 

Most of the bathroom area is made of ceramic or glass, and the surface is smooth and easy to clean. Bathroom tiles are generally dusty and can be wiped off with a damp cloth. The tempered glass door of the bathroom, if it is particularly dirty, can be wiped with a soft cloth and special cleaning solution and then rinsed with water.

 

The bathroom mirror can be wiped with a clean wet rag to ensure that there is no cleaning product on the rag. As long as it is rubbed several times, it will be translucent. It is easy to have a watermark after wiping with detergent. The faucet in the bathroom is the most prone to dirt. The chrome-plated surface of the stainless steel faucet is prone to gloss degradation and white spots, and scale stains are also likely to occur around the faucet. The place where the root of the faucet is in contact with the ceramic basin is also a place where it is easy to hide dirt.

 

To clean the scale on the faucet, first, wash the faucet with clean water. The gap can be rubbed with a soft toothbrush and wiped with a soft cotton cloth. Then use a neutral detergent to smear on the faucet, wipe with a soft cloth, use used stockings, etc. Friction gap, a root of the faucet. Finally, clean the gap between the faucet and the ceramic basin.