Stainless steel is easily eroded after the protective l […]
Stainless steel is easily eroded after the protective layer is damaged, so care should be taken during daily use. The following eight points are about the details of the maintenance of stainless steel laundry cabinets.
1.After the stainless steel washing machine cabinet is delivered to the house, the house is still being renovated. Pay attention to the ventilation of the normally open window to avoid the oxidation of the stainless steel surface by the corrosive gas emitted by the decoration material, thereby causing the stainless steel to rust.
2.For newly renovated customers, you can apply a layer of oil on the surface of the stainless steel laundry cabinet, which will be less rusting than ordinary stainless steel materials when used! If you have a rust, use a toothpaste at home to wipe it, which will have a good rust removal effect.
3.After using the stainless steel washing machine cabinet, try to rinse and dry with water. Do not let the water residue remain on the surface of the stainless steel. High-iron content may cause brown-red marks on the surface. If water spots are generated, use decontamination powder or detergent. Brush it on it.
4.If the water that has not been dried is already produced, it is already difficult to remove the water stains. It can be removed with a low concentration of vinegar solution, and finally completely washed with water.
5.To clean the surface of stainless steel laundry cabinets frequently, it is best to use sponge, cloth and neutral detergent.
6.When scrubbing the stainless steel laundry cabinet , try not to use steel wool, steel brush or rough brush. Because of their high scrubbing force, it is easy to scratch the stainless steel protective film or make the metal particles adhere to the surface. The service life of stainless steel washing machine cabinets.
7.Do not use rubber pads in the basin of the stainless steel laundry cabinet, because the dirt under the rubber mat is difficult to clean.
8.When using, let the stainless steel avoid contact with drift powder, household chemicals and soap for a long time. If it is used, wash it with water as soon as possible and dry the surface with a towel.