Do You Really Buy A Stainless Steel Laundry Sink?


The sink is an indispensable part of the modern family. […]

The sink is an indispensable part of the modern family. Many homes have installed sinks, and some have not only installed one. The kitchen needs to use a sink to wash the dishes, and the bathroom needs a sink to wash the clothes. Some even install a sink on the balcony to facilitate the need for washing. Stainless steel sinks are the most common sinks in many sinks. How should Stainless Steel Laundry Sink be purchased?

First, the stainless steel faucet process has a welding method and an integral molding method.

We have seen some brand-name sinks, the same size, the price is very different. There are material factors as well as process costs.

Of course, it can be said with certainty that the stainless steel sink material of the one-piece molding method is definitely better than the welding method. The first-class water tank is generally produced by one-time stamping method. Of course, there are also low-end products in the famous brand. There are many welding methods, and the hand touches it. Got it. Solder tight, no solder joints. Welding quality is one of the most critical factors affecting the life of the water tank. It is welded well to prevent raw embroidery and desoldering. This is in terms of double slots.

Second, the best steel plate for making the sink is the 304 steel plate.

This steel plate is the most suitable for kitchen use regardless of hardness and wears resistance. The steel surface is particularly smooth, no oil, no dirt, no need to brush the ball to clean, use a rag is enough. Generally, the water tank needs to have an overflow device, and the surface looks fine.

Third, environmental protection and hygiene, easy to clean, good levelness.

The most intuitive criteria for determining quality and grade are gloss, oil and no smudge after washing in the basin.

Material anti-fouling is a priority when purchasing a sink. In order to make the sink clean, many people are used to brushing with a steel ball. The sink is clean for a while, so the sink is actually dirty. Because of the easy-to-scale sink, the quality of the steel is not so good, and it is easier to hang dirty things with a steel ball.

Fourth, the water pipe is leakproof, the precision of the fittings and the accuracy of the water tank are the same.

The water pipe is leakproof, the precision of the fittings and the precision of the water tank are the same. The PVC material is used, and the life of the water tank is the same as that of the water tank, and the water is leak-proof.

The positioning of the steel ball is the key to the sewage discharge. The steel ball has good positioning quality and can quickly remove the sewage to prevent the odor from returning. The downpipe is another key to the sink to prevent odors. Designing the downpipe to be S-shaped can reduce the back smell of the sewer. It is even more perfect with a special sterilization process.

Fifth, the thickness of the sink should be moderate, too thin and too thick.

Generally, the thickness of the water tank is 0.8mm-1.0mm, and the quality of 1mm is relatively good. Too thin affects the service life and strength of the water tank. If it is too thick, it will easily damage the tableware. Good stainless steel sinks use thicker plates. Because the sink has been edge treated, it is difficult to see the thickness at once. The easiest way is to press the surface of the sink a little bit. If it is pressed, the material is very thin, of course. You can borrow vernier calipers and spiral micrometers without being so troublesome.