Home / News / 3 Classification Requirements For Stainless Steel Faucets

3 Classification Requirements For Stainless Steel Faucets

There are 3 classification requirements for Stainless Steel Faucets :

1. According to the material, it can be divided into SUS304 stainless steel, cast iron, all-plastic, all-copper, alloy material faucet, polymer composite material faucet, and other categories, the faucet with a 90-degree switch is changed from the original rubber seal to a ceramic sheet seal, opening and closing When rotating the handle 90 degrees, it can be adjusted on both sides of the hot and cold water, which is characterized by easy opening.

2. According to the function, it can be divided into the basin, bathtub, shower, and kitchen sink faucet, there are two kinds of faucets, one is a ball valve, and the other is a screw valve. The ball valve is a ball under the switch of the faucet. The ball is close to the wall of the faucet. There is a round hole on the ball. Toggle the switch so that the direction of the round hole is different from the direction of the pipe, and the water flow will slow down or stop.

3. According to the structure, it can be divided into single-type, double-type, and triple-type faucets. The faucet is used to control the size switch off the water flow, which has the effect of saving water, and the classification of the faucet can be based on the material, function, structure, opening, and closing. There are different types of faucets, one for each style.