What Should I Do If The Stainless Steel Bathroom Faucet Is Blocked?

Update:11-08-2018
Summary:

After using the Stainless Steel Bathroom Faucet  for a […]

After using the Stainless Steel Bathroom Faucet  for a long time, it is easy to block due to water quality and quality. Many people don't know what to do. The following small series will share the treatment method of blocking the stainless steel shower faucet.

1. Needle
If your stainless steel shower faucet is blocked by some small holes, first release the water and see that the holes are blocked. Then you have to open the stainless steel shower head of the shower and see that there are many holes in the stainless steel shower head like the shower head. Here is where the water comes from. Then we will prepare a needle first, and then use the needle to see the hole in the hole that has just been punctured, until there is no impurity in the hole. This method is the most straightforward, but be careful to stab the stainless steel shower faucet hole.

2. Dip with vinegar
If your stainless steel shower head is blocked for a long time, and a lot of holes are blocked. Then using a needle to puncture one by one is obviously not very obvious. In this case, it is recommended that you use acidification and dust removal to solve the problem of blockage of the shower stainless steel shower head. You need to prepare some white vinegar and pour the vinegar into the basin. The stainless steel shower faucet can be immersed. After immersing the vinegar for about ten minutes, the scale in the stainless steel shower faucet can be removed.

3. Using lubricant
If the stainless steel shower faucet metal rust causes the blockage to be very serious, then use the WD-40 rust and rust preventive lubricant. This rust-reducing lubricant has very good affinity and permeability to metals. The rust layer and the metal layer can be separated. Make the rusted part and the metal contact surface and leave a protective film. Let the shower never die. If your stainless steel shower faucet is not made of stainless steel, you may use this method.

4. Wipe with a towel
If your stainless steel shower faucet has been in existence for a certain number of years, and the appearance is old. It is better to recommend replacing a new shower. The continued use of such stainless steel shower faucets is not good for health. Because there may be a lot of harmful bacteria and impurities in the inside.

If your home's stainless steel shower faucet is still good, then you can't take it lightly. Start with prevention. Usually have a good habit of showering and bathing. Before the end of the shower, use a towel to clean the shower stainless steel shower faucet to prevent the remaining scale. For the water hole of the rubber material, you can use your fingers to lick it. If it is made of stainless steel or copper, you can use a paper clip to clear the water hole.