Stainless Steel Sink Manufacturers Share The Standard Of Buying A Sink At A School


Stainless Steel Sink Manufacturers share the criteria f […]

Stainless Steel Sink Manufacturers share the criteria for buying a sink at a school:

1. Determine the width of the sink according to the width of the kitchen countertop. The general sink width of the kitchen countertop should be approximately 100 mm. At the same time, according to the characteristics of the domestic kitchen countertop size of 500mm-600mm, it can be concluded that the reasonable width of the sink is 430mm-480mm.

2. the material is made of 304 stainless steel, so that the sink has toughness, which can avoid damage caused by various impacts of various porcelains. The easiest way is to press the sink surface a little bit. If pressed, the material is very thin. The material thickness is moderate, 0.8mm-1.0mm is appropriate, too thin does not affect the service life and strength of the sink, too thick, not easy to lose strength, easy to damage the washed dishes.

3. Stainless steel is a kind of iron alloy. The specific gravity of steel is 7.87. Nickel and chromium heavy metals are added internally. The specific gravity of these metals is greater than the specific gravity of the steel and therefore the weight is relatively heavy. Counterfeit stainless steel, such as steel plate chrome, is lighter.

4. Under normal circumstances, the washing tank with a large amount of washing has good practicability, and the depth at 200 mm is better, which can effectively prevent water splashing. At the same time, depth is also an important indicator of the level of the sink. The double-slot sink with a depth of more than 180 mm is very high. Grade product.

5. Surface flatness is the most intuitive standard for checking the quality and grade of the sink. The line of sight is the same as the plane of the sink. The edge of the sink should not protrude and not warp. The error is less than 0.1 mm. The flatness is not good, in addition to affecting the appearance, it is also easy to cause water seepage and scaling. The surface of the sink is beautiful and practical, with matte finish. Not only does it have no glare, but it also withstands the repeated wear of porcelain and tableware. It is easy to clean and is often used as a new product.

6. The quality of the sewer and the lower water pipe directly affects the use of the water tank. The preferred material for the lower water pipe should be PP material or UPVC. High sealing, elastic, heat-resistant, anti-cracking, long life, reasonable shape design and deodorization. , anti-recovery design, easy installation, no blockage, water seepage and other phenomena. The sewer has steel ball positioning, extrusion sealing and platform controlled water removal. The sealing performance is good, the water storage is convenient and fast, the impurities are automatically filtered, the water pipe is blocked, the high quality rubber is used, and the wear is not easy. The fastening seal is fixed with self-tapping screws to ensure sealing and safe and quick operation.

7. According to the washing characteristics of Chinese households, it is best to choose a large diameter, made of stainless steel. The garbage collection basket is the best. From a convenient and practical point of view, you can choose one big and one small "child" type sink.