Stainless Steel Kitchen Sink Installation Method


In general, the steps for installing a Stainless Steel […]

In general, the steps for installing a Stainless Steel Kitchen Sink  are like this:

1.Stainless steel kitchen sink position fixed:

Stainless steel kitchen sinks must be determined before installation, so that we can order according to the size, it is best to have a sink plan, so as not to be inaccurate data, resulting in rework. In addition, after the stainless steel kitchen sink is installed firmly, do not shake it from side to side, it is easy to leave a gap and cause looseness. Moreover, the most important thing to note is the tightness of the joint gap.

2.Installation of faucets and inlet pipes

Before installing the stainless steel kitchen sink, the faucet and inlet pipe should be installed first, and the inlet pipe at the other end should be connected to the water inlet switch.

3.Stainless steel kitchen sink placed on the countertop

After the stainless steel kitchen sink is placed in the countertop, it is necessary to install matching pendants between the wall and the countertop. However, as much as possible, pay attention to the sealing effect of the sink during the installation process.

4.Overflow hole, filter

The degree of sealing of the overflow and the filter determines the effect of the use of the sink in the future. The higher the sealing degree of the overflow hole and the filter, the less likely it is to be problematic in the later stage.

5.Install accessory pendant

Installation of supporting pendants is generally considered to be the last step in the installation of the sink. Generally, only when the sink is bought, the workers will cut the countertops according to the size of the sink and put them into the countertops. When installing, each gap should be filled to avoid water leakage problems in the future.

6.Drainage acceptance

After the stainless steel kitchen sink is completely installed, it is necessary to fill the water tank with water and do a drainage test. If there is leakage, you should immediately find the problem and repair it.

7.Edge banding

After the drainage test ensures that there is no problem, the sink can be edged. When sealing with silicone, it is necessary to ensure that the gap between the sink and the countertop is even and there is no water seepage.