Stainless Steel Kitchen Cabinet Manufacturer Tells You How To Choose A Countertop

Update:30-09-2018
Summary:

Stainless steel cabinets are common furniture in the ki […]

Stainless steel cabinets are common furniture in the kitchen. Most people choose the stainless steel cabinet countertops when they buy. I don't understand, in fact, the choice of cabinets should be chosen according to their own needs, making the kitchen more fashionable, but for the choice of stainless steel cabinet countertops, AFA Stainless Steel Kitchen Cabinet Manufacturers  suggest that you still have to learn, here we might as well look at:

1. Look at the edge of the board.

The sealing edge of the cabinet is fine, smooth and feels good. The sealing line is straight and smooth, and the joint is fine. Professional manufacturers use straight edge banding machine to complete the steps of edge sealing, broken head, trimming, chamfering and polishing. The glue is evenly applied, the pressure of the sealing edge is stable, and the precision of the processing size can be adjusted to the proper position to ensure accuracy. size of. The workshop-style small factory uses a brush to apply glue, manually presses the edge seal, trims the edge with a crepe paper cutter, and polishes it with a manual polishing machine. Due to uneven pressure, many places are not strong, and formaldehyde and other toxic gases are volatilized. in the air.

2. Look at punching.

Today's panel furniture is assembled by a three-in-one connector, which requires a lot of positioning holes on the board. The fit and precision of the hole position will affect the structural robustness of the cabinet. The professional manufacturer uses a multi-row drill to complete a hole on the side of the board and on the board surface. These holes are a positioning reference, and the dimensional accuracy is guaranteed. Manual small factories use row drills, even pistols to drill holes, and the dimensional error is large.

3. Look at the board.

The cutting board is also called the opening of the board, which is the first process of cabinet production. Large-scale specialized enterprises use electronic cutting saws to input the processing size through computer, the computer controls the size accuracy of the material selection, and can process several plates at a time. The performance of the equipment is stable, and the plate size accuracy is very high, and the tolerance unit is in the micrometer. And there is no collapse at the edge of the board. Small hand-operated saws are used in small workshops, which have large dimensional errors and often collapse.

4. Look at the door panel.

The door panel is the face of the cabinet, just as important as the human face. Door panels produced by small factories are susceptible to moisture deformation due to improper handling of the substrate and surface processes.

5. Look at the assembly effect of the whole set of cabinets.

Any dimensional error in the production process will be displayed on the door. The door panels produced by professional manufacturers are horizontal and vertical, and the gap between the doors is even, and the cabinets in the small factory will have uneven door gaps and uneven gaps. Big and small.

6. Look at the slide rails of the drawer.

Although it is a small detail, it is an important part of the quality of the cabinet. Due to the dimensional error of the hole position and the plate, there is an error in the matching of the mounting dimensions of the slide rail, which causes the drawer to be pulled unsmoothly or loosely left and right, and it is also necessary to pay attention to whether the drawer gap is uniform.