Handmade Sink Manufacturers Share Practical Methods For Determining The Size Of The Sink

Update:25-05-2019
Summary:

When measuring the size of the kitchen cabinet, be sure […]

When measuring the size of the kitchen cabinet, be sure to pay attention to the size of the kitchen sink, which will affect the comfort of the owner and the hygiene of the kitchen. The unreasonable size of the kitchen sink is easy to cause splashing of tap water when using water, which causes the cabinet to be in a humid environment for a long time. It is easy to produce sanitary corners, breed microorganisms and bacteria, and seriously affect the health of the kitchen. The owner of the room bends back and washes the dishes and washed vegetables. Extremely uncomfortable, not conducive to the owner's long-term use. So how can we determine the right size of the kitchen sink? Below handmade sink manufacturers  Just introduce it to everyone.

First, the general size of the kitchen sink.

1, the average family's double-slot length is 750~770mm, and the width is 400~420mm.

2, the kitchen can be installed with a single slot length of 420 ~ 450mm, a width of 320 ~ 350mm.

3, the above counter basin installation above counter basin type of sink installation is relatively simple, just open the hole in the predetermined position on the table according to the installation drawings, then place the basin in the hole, fill the gap with glass glue, when using the countertop Water does not flow down the gap, so it is used more in the home.

4, Taiping basin installation This type of kitchen sink uses a flat basin installation method to achieve the seamless installation of the sink and countertop. The edge of the flat sink makes it easy to wipe water droplets and other stains into the sink. No stains will remain in the gap between the sink and the countertop, making it safe and hygienic. Thanks to the seamless installation of the sink and countertop, you have more room to use. The sink is perfectly matched to the countertop and has a beautiful shape.

Second, determine the size of the kitchen sink.

1. The size of the kitchen sink is determined according to the size of the counter top, because the kitchen sink can be installed on the stage, Taichung, and under the stage, so the size is different.

2, when choosing a stainless steel kitchen sink, the material thickness should be moderate, too thin will affect the service life and strength of the kitchen sink, too thick and easy to damage the washed tableware. Also depends on the flatness of the stainless steel surface, such as unevenness, indicating poor quality.

3, under normal circumstances, the kitchen sink with a large cleaning volume is practical, and the depth is about 20 cm so that it can properly prevent splashing.

4, the kitchen sink surface treatment with a matte surface is beautiful and practical, the kitchen sink should be carefully observed, the weld must be even and even, no rust spots.

5, beautiful shape, reasonable design, with an overflow as well.