Stainless Steel Sink Manufacturers Tell How To Avoid The Minefield Where The Sink Is Installed


The stainless steel sink is popular among the public be […]

The stainless steel sink is popular among the public because of its high-quality materials. The stainless steel sink is processed by the main body by stretching or welding, and then the surface-formed product is formed, which is an indispensable part for the installation of the cabinet. Now the modern kitchen is washed. One of the indispensable tools for dishes or dishwashing. Stainless steel sink installation is also a matter of learning. Today, Stainless Steel Sink Manufacturers  teach you how to install stainless steel sinks.

Drain pipes are basically made of PVC materials, but the materials also have advantages and disadvantages. The inferior material feels soft and has poor temperature resistance, which may cause the drainage pipe and the trough body to fall off due to deformation, which affects the use. Some good drainage pipes are not only selected materials but also some anti-bacterial and non-oil treatment inside the water pipes, ensuring the quality of the sewage from the nuances.

There are several problems in the process of installing the sink. Everyone needs to pay attention to it. Pay attention to the following problems to better avoid undesirable phenomena during use.

1, the sink is installed in the kitchen renovation

The installation of the sink should be left at the end of the kitchen renovation. The installation of the sink is not a big project. Prepare the sink for the prepared items and install them. After the sink is ready, install the installer directly.

2. The water pipe must be drained during installation.

Be sure to drain the water from the water pipe before installing the water tank. If the water is not drained during installation, it will cause water leakage and rust in the water tank in the future.

3, the faucet must be firm when installing

This point is very important for everyone to pay attention to, when installing the sink must pay attention to the firmness of the joint, but also pay attention to the location of the hot and cold water pipe, do not make a mistake. If the installation is not strong, there will be gaps near the sink, resulting in water leakage. 4. It needs to be cleaned after installation.

After the installation is completed, the sink must be cleaned and the debris during installation should be thoroughly rinsed. In addition, the stains that are easy to see in the daily sink can be treated like this. The sink should be cleaned with warm water, washing liquid and soft cloth after use. The usual stains can be removed immediately; the usual stains such as garbage and cream are slightly polluted and should not be used. Wash with a strong detergent; food that easily contaminates the sink should be washed immediately with water or detergent to prevent alkaline deposits from remaining in the sink.