Stainless Steel Handmade Sink Manufacturers Reminds The Depth Of The Sink To Be Appropriate?

Generally, when we install the sink, we will consider how much depth the sink needs to buy. There are different opinions. Today, Stainless Steel Handmade Sink Manufacturers will discuss this issue and discuss the appropriate depth.

The first one thinks that the depth of 220mm is more suitable for Chinese kitchens because the 220mm ultra-deepwater tank is vertically divided into walls, the R10 gold radius is larger, and the sink space is larger. It is more suitable for Chinese families, rear hole design, expanding cabinet usage area, and many advantages. of.

The second type is considered to be suitable for domestic use. The height of the sink is 180mm or more, which has the advantages of large capacity and splash resistance. Surface flatness: It is the most intuitive standard for checking the quality and grade of the sink. The line of sight is consistent with the plane of the sink. The edge of the sink should not protrude, and it will not warp. The error is less than 0.1mm. The flatness is not good, in addition to affecting the appearance, it is also easy to cause water seepage and scale.

The third conservative is that the reasonable width of the sink is 430-480mm. Since the depth of the water tank is more than 180 mm, it is suitable to prevent splashing of water. The thickness of the sink should be moderate, 0.8~1.0mm is appropriate, too thin will affect the strength of the sink, too thick will affect the washing effect.

The final conclusion is that the depth that suits you is the best, so don't use standards to measure your depth of need.